Oil seals manufacturers in saudi arabia: We are ready to supply all type of oil seal products to worldwide customers.

For Website User Referance:
Oil Seal Suppliers In Saudi Arabia, Oil Seal Dealers In Saudi Arabia, Oil Seal Distributors In Saudi Arabia, Oil Seal Manufacturers In Saudi Arabia.

Our Near by supply areas in Saudi Arabia,
Jeddah, Riyadh, Dammam, Yanbu, Rabigh, Qassim and we will do worldwide supply.

A device for preventing the entry or return of oil from a chamber.
A device using oil as the sealing medium to prevent the passage of fluid from one chamber to another.

  • OIL SEALS-RUBBER, PTFE, PLASTIC
  • OIL SEALS-STEEL.HIGH TEMP
  • OIL SEALS(VITON)
  • SHAFT SEALS
  • GLAND SEALS.SEALING WASHERS
  • OIL SEAL KITS
  • PISTON SEALS
  • ROD SEALS
  • ROTARY SHAFT SEALS
  • VALVE STEM SEALS
  • BUNA-N
  • SILICONE.TEFLON SEALS
  • LABYRINTH SEALS
  • GREASE SEALS
  • SEALING WASHERS
  • ROD SEALS(HYDRAULIC SEALS)
  • VALVE STEM SEALS

PISTON SEALS

piston profiles are fluid seals specifically designed to function as piston seals in pneumatic and hydraulic cylinder applications. The outside diameter lip is designed to seal against the cylinder bore while the inside diameter lip is designed to seal the gland. For most non-symmetrical piston profiles, the size of the seal is slightly smaller in diameter than the gland diameter. When installed, the seal stretches into the gland to ensure a tight seal with the gland and improved stability in application.

ROD SEALS

Rod seals are used in hydraulic cylinders for fluid sealing. They are external to the cylinder head and seal against the cylinder’s rod, preventing leakage of fluid from within the cylinder to the outside.

ROTARY SHAFT SEALS

The primary function of a rotary sealis to retain the bearing lubricant and, secondarily, to enhance the performance and life of the bearing by minimizing dirt, oil and water ingress that leads to damage and premature failure of the bearing and other components.

VALVE STEM SEALS

The valve stem seal is a critical element in the efficient operation of an engine. It controls thelubrication of the valve stem as itslides in the valve guide. A lack of oil causes premature valve stem and valve guide wear. The valve stem seal regulates the amount of oil entering the valve guide.

BUNA-N SEALS

Nitrile rubber, also known as Buna-N, Perbunan, acrylonitrile butadiene rubber, and NBR, is a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene. Trade names include Nipol, Krynac and Europrene.

LABYRINTH SEALS

A labyrinth seal is a type of mechanical seal that provides a tortuous path to help prevent leakage. An example of such a seal is sometimes found within an axle’s bearing to help prevent the leakage of the oil lubricating the bearing.

A labyrinth seal may be composed of many grooves that press tightly inside another axle, or inside a hole, so that the fluid has to pass through a long and difficult path to escape. Sometimes screw threads exist on the outer and inner portion. These interlock, to produce the long characteristic path which slows leakage. For labyrinth seals on a rotating shaft, a very small clearance must exist between the tips of the labyrinth threads and the running surface.

GREASE SEALS

A grease seal, often called an oil or dirt seal, is a type of seal utilized to retain grease in a case or housing. Grease seals close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. Preventing harmful containments from entering machinery is another critical function of a grease seal. In a typical application, the grease seal is installed adjacent to a bearing, sealing in or sealing out, as necessary, the various liquids, gases or solids encountered by the particular mechanism.

PISTON SEALS

Piston seals for hydraulic cylinders separate the two pressure chambers on the rod and piston side of the cylinder.

ROD SEALS(HYDRAULIC SEALS)

A hydraulic seal is a relatively soft, non-metallic ring, captured in a groove or fixed in a combination of rings, forming a seal assembly, to block or separate fluid in reciprocating motion applications. Hydraulic seals are vital in MACHINERY. Their use is critical in providing a way for fluid power to be converted to linear motion. Hydraulic seals can be made from a variety of materials such as polyurethane, rubber or PTFE. The type of material is determined by the specific operating conditions or limits due to fluid type, pressure, fluid chemical compatibility or temperature.

ROTARY SHAFT SEALS

Also known as an OIL SEAL, SHAFT SEAL, ELASTOMERIC LIP SEAL or any variation of these. SIZES – over 8000 sizes of Rotary Shaft Seals are available. Radial shaft seals, also known as lip seals, are used to seal rotary elements, such as a shaft or rotating bore.

VALVE STEM SEALS

Valve stem seals are devices that provide a defined metering rate of oil to the valve stem interface of internal combustion engines to lubricate the valve guide and minimize engine missions.